At (or Near) Wholesale Prices: Happy Product - Sad Box >
Give Us A Call
615-373-1444

10am - 4pm CST
Results 1 to 2 of 2

Thread: ERCE035 Speed Controller with BEC, operating without BEC?

  1. #1

    ERCE035 Speed Controller with BEC, operating without BEC?

    Hi there!

    I recently purchased an ERCE035 motor control:
    Is it possible to 'disconnect' the BEC feature of the motor control by removing the red wire from the connector that is inserted into the transmitter; if so, will the motor control still operate properly?


    RSVP,

    David P

    Bellevue, WA

  2. #2

    It sure can be done! Thoughts on Battery Elimination Circuit (BEC)

    Hello David,

    The good news is, Yes; if you want the BEC feature disconnected

    On any ESC with a BEC, the procedure is to disconnect the positive, or red wire, from the connector that is inserted into the receiver in the RC model. The speed control or ESC will continue to work just fine.

    Of course, the receiver in the airplane will still need to have power from either a battery or a some additional BEC in your setup.



    Happy Flying!!
    Scott.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •