At (or Near) Wholesale Prices: Happy Product - Sad Box >
Give Us A Call
615-373-1444

10am - 4pm CST
Results 1 to 2 of 2

Thread: Questions regarding variable pitch propellers and Su-34 vector thrust jet

  1. #1
    Posting Questions from Customers Customer Questions's Avatar
    Join Date
    Jun 2012
    Posts
    249

    Questions regarding variable pitch propellers and Su-34 vector thrust jet

    Variable Pitch Propeller
    1) I purchased your B-25 a few years ago and was wondering can the 3-bladed variable pitch prop be placed on that plane and can the variable pitch prop be set up in reverse so that each motor is counter-rotating like the original prop set-up?

    Su-34 vector thrust jet
    2) After reading the on-line manual for the Su-34 vector thrust jet it talked about cutting the foam to replace the original 64 mm duct with a 70 mm duct. If you do that do you have to enlarge the area where the 70 mm duct sits inside the body of the air-frame?

    3) Regarding the Su-34 vector thrust jet can you access the 64 mm duct without cutting the air-frame? I have your Mig-15 and in that model you unscrew two screws the access the duct and motor.

  2. #2
    1) No those props are too large and they cannot be reversed for counter rotating.

    2) That is the purpose of cutting the foam. You have to make the area larger to fit the larger fan unit in.

    3)On the SU-34, the only access is to cut the foam open and re-glue it back when done.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •