At (or Near) Wholesale Prices: Happy Product - Sad Box >
Give Us A Call
615-373-1444

10am - 4pm CST
Results 1 to 2 of 2

Thread: If I purchase a Fokker DVII 250 ARF kit, what all other do I need to purchase, glues,

  1. #1
    Posting Questions from Customers Customer Questions's Avatar
    Join Date
    Jun 2012
    Posts
    249

    If I purchase a Fokker DVII 250 ARF kit, what all other do I need to purchase, glues,

    If I purchase a Fokker DVII 250 ARF kit, what all other do I need to purchase, glues, motors etc? Have never built one of these products but have assembled balsa kits years ago.

  2. #2
    You'll need a small receiver for your radio and the parts listed below.

    Required Tools and Adhesives:
    Pencil
    Square
    Pin drill - Pin Vise w/ 12 asst. Drills #50-#80 from Hobby Lobby
    Pliers
    Ruler
    Hobby scissors
    Diagonal Cutters
    Low-tack Tape
    Needle Flat blade screwdriver: 1.5mm
    Low-temp glue gun
    Medium grit sandpaper
    Phillips screwdriver: #0, #1
    Hobby knife (#11 blade) - Knife and Blade Holder from Hobby Lobby
    Drill bit: 1/16-inch (1.5mm)
    Threadlock - Devcon Blue Threadlocker .2oz TB from Hobby Lobby
    Thin CA - Insta-Cure Super Thin CA, 1/2 oz. from Hobby Lobby
    Medium CA - Insta-Cure Gap Filling CA, 1/2 oz. from Hobby Lobby
    RTV silicone
    White glue
    30-minute epoxy - 30 Minute Epoxy, 9 oz. from Hobby Lobby
    Foam-safe CA - Super Gold Thin Odorless Foam Safe CA, 1/2 oz. from Hobby Lobby

    Power System/Servos:
    Park 250 motor - Park 250 Brushless Outrunner motor from Hobby Lobby
    12A ESC - eRC 12A Brushless Programmable ESC w/BEC from Hobby Lobby
    7x4 prop - 7x4 APC Slowflyer Prop from Hobby Lobby
    2S 800mAH Lipo battery - 800mAh 2S 7.4V 30C LiPo battery w/ JST from Hobby Lobby
    (2) 6g servos - eRC 6 Gram Precision Micro Servo from Hobby Lobby

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •