At (or Near) Wholesale Prices: Happy Product - Sad Box >
Give Us A Call
615-373-1444

10am - 4pm CST
Results 1 to 2 of 2

Thread: eRC F-18 programming with DX8 - Thank you Jason!

  1. #1

    eRC F-18 programming with DX8 - Thank you Jason!

    For those of you who are or will be using the DX8 and the way cool F-18, here is some updated information.

    #1. Following the manual, make sure you reverse your rudder servo or it will steer the opposite direction.
    #2. When you get to step 35 and start mixing it should read as follows:
    Select Prog.Mix1 from the radio menu. Set the mix for ELEV to AUX1. Make sure that the rates are both set at
    -100% and that the switch is set to mix. There should be no offset for this mix.
    #3. When you get to step 36. Select Prog.Mix2 from the radio menu. Set the mix for ELEV to AUX2. Make sure that the
    rates are both set at -100% and that the switch is set to mix. There should be no offset for this mix.
    #4. When you get to step 37. Select Prog.Mix3 from the radio menu. Set the mix for AILE to AUX1. Make sure the rates
    are both at +100% and that the switch is set to on. There should be no offset for this mix.
    #5. When you get to step 38. Select Prog.Mix4 from the radio menu. Set the mix for AILE to AUX2. Make sure that the
    rates are both at -100% and that the switch is set to on. There should be no offset for this mix.

    ENJOY!

  2. #2

    Re: eRC F-18 programming with DX8 - Thank you Jason!

    P.S. Step 4 should be -100
    Step 5 should be +100

    I took the original information off another website and it was incorrect.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •