At (or Near) Wholesale Prices: Happy Product - Sad Box >
Give Us A Call
615-373-1444

10am - 4pm CST
Results 1 to 4 of 4

Thread: 64mm Frewing Combo ESC not running motor

  1. #1

    64mm Frewing Combo ESC not running motor

    Just got the new shippment of 64mm Freewing combo FW3070, I plug it in with the throttle off or on full blast, I hear 3 beeps but cannot get the motor to spin...

    1. channer 3 hook up lipo 4s 3000 40c 3 beeps, move throttle to full nothing, bring throttle down then back up nothing...

    2. Start motor at full blast hear 3 beeps then return throttle to off, no sound, then move throttle to full on notheing...



    cant seem to get the motor edf motor going with esc supplied in combo


    Wha am I missing?

  2. #2
    Senior Member Jay Burkart's Avatar
    Join Date
    Jun 2009
    Location
    Smithfield KY
    Posts
    214

    Re: 64mm Frewing Combo ESC not running motor

    Check to see that your throttle channel is not reversed.
    Also make sure you are coming back to low throttle, that the throttle channel is set to it's lowest throw and that
    the throttle trim is all the way back.

    Also try plugging a servo into the throttle channel and that it works.
    Jay
    SAM Grand Champion 2004.07,10,12

  3. #3

    Re: 64mm Frewing Combo ESC not running motor

    I had this same problem. I am using a JR10X radio and an AR7000 reciever. I finally got it working by binding my radio with my reciever with my my throttle at 100%. I brought the throttle back down and got the beeps. Then the esc worked. I hope it is this simple for you.

  4. #4
    Senior Member Jay Burkart's Avatar
    Join Date
    Jun 2009
    Location
    Smithfield KY
    Posts
    214

    Re: 64mm Frewing Combo ESC not running motor

    Notafan,

    Thanks very much for that input.
    That is most helpful.
    That sure seems like an odd way to go about it to get it to work.
    But you sure can't knock success.

    Regards,
    Jay Burkart
    SAM Grand Champion 2004.07,10,12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •